Gate Titan V2 Basic Module Rear Wired (Semi Only)
SKU: 5712

99,95

Not in stock at the moment
Share us
Product description

This mosfet is intended for the German market, it can only be used for semi-automatic shooting. Conversion or reprogramming to fully automatic is not possible.

The GATE Titan is the latest generation of drop-in mosfets. With the help of 8 sensors, this mosfet gets the best out of your AEG. Extremely fast trigger response and 20 special functions give the user the tactical advantage of adapting the rifle's capability to any mission requirement.

The BASIC firmware edition is a budget version with a limited set of features, intended for those who prefer simplicity but need the highest quality. If you decide to go for more features, there is always an option to upgrade the firmware from BASIC to ADVANCED.

Main functions:

TRIGGER SENSITIVITY ADJUSTMENT - allows trigger sensitivity to be adjusted to user preference and skill without disassembling the rifle.

CONFIGURABLE FIRE SELECTOR - provides the ability to program the fire selector. Up to six modes are available: - STOCK WIRING SEMI/AUTO

CYCLE RECOGNITION - TITAN precisely recognizes in which position the cycle should end. This is why even the shortest withdrawal process leads to at least one full cycle.

PRE-COCKING - Provides trigger response like a real gun. It allows for an initial spring compression that significantly speeds up trigger response. There are three BOOST options: HIGH / MID / LOW and PRE-COCKING MODE:

- AUTO MODE - the spring is automatically compressed after each shot,

- TRIGGER MODE - the first trigger action compresses the spring, and the second trigger action fires the shot.

ROF STAB - allows changing the way the ROF control works:

- ON - ROF Control uses PWM to reduce ROF. This makes the gearbox work more evenly, which reduces wear on the internal parts of the AEG.

- OFF - ROF Control adds pauses between shots to reduce ROF. This provides a more realistic experience.

SNIPER DELAY - inserts a delay between each SEMI shot to simulate the delay caused by reloading or recoil. It can be set to 0.5s, 1s, 2s or 3s delay.

SMART TRIGGER - allows for faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). This results in the first shot being fired at full rate of fire and subsequent shots being fired at reduced ROF.

BATTERY PROTECTION - against over-discharge of the battery. The microprocessor constantly monitors the battery voltage. If the voltage drops to a critical level, the controller will not allow shots. When the battery voltage drops to a predetermined level, the motor vibrates at regular intervals.

SMART FUSE - electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurement makes an AEG installation extremely reliable. It protects the MOSFET from overheating, overloading and short circuits. When your airsoft gun is jammed, the function protects the motor and battery from damage.

The MOSFET transfers the energy from the battery directly to the motor, bypassing the conventional mechanical trigger contacts. This gives the replica a higher rate of fire, a faster trigger reaction and the contacts are protected from burning out.

BUILT-IN SELF-TEST - This allows you to quickly check if the device is working properly.

COATING - Thanks to the special coating, the product is weather resistant (military specification MIL-V-173C).

Further information at: www.gatee.eu

Product video for Gate Titan V2 Basic Module Rear Wired (Semi Only)

[borlabs-cookie id="youtube" type="content-blocker"][/borlabs-cookie]